← All blogs

Round Rock, TX Electrical Panel & Service Upgrade Costs

Upgrading from a 100 amp to 200 amp electrical panel is one of the most impactful safety and capacity projects you can do. If you’re Googling electrical panel upgrade cost for your Austin home, you likely have tripping breakers, adding an EV charger, or planning a remodel. Here’s a clear, Austin‑specific guide to prices, what drives them, and how to avoid surprise change orders. Bonus: eligible homeowners can claim a free in‑home consultation with A Team Home Services.

Why Homeowners Upgrade From 100 Amp To 200 Amp

A 200 amp panel gives your home more headroom for modern loads and reduces nuisance trips.

Common triggers to upgrade:

  1. EV chargers or future EV purchase
    • Level 2 charging typically requires a 240V, 40A to 60A circuit.
  2. High‑efficiency HVAC or heat pumps
    • New systems can add 30A to 80A of demand.
  3. Kitchen or laundry remodels
    • New appliances need dedicated 20A or 30A circuits.
  4. Solar, hot tubs, or backyard studios
    • Additional subpanels and feeders are easier on 200A service.
  5. Old fuse boxes or crowded breaker panels
    • Safety and code compliance are top priorities.

Review callout: “Jake came to my house give me an estimate for upgrading the electrical panel. He arrived on time, was knowledgeable, answered my questions, explained the processes involved in the job, and gave me options.”

What Does A 100A To 200A Upgrade Typically Cost In Austin?

Most Austin‑area homeowners spend between $3,000 and $6,500 for a full 100A to 200A upgrade. Complex projects with service‑entrance relocation, long mast runs, or major grounding corrections can reach $7,500+.

What this usually includes:

  • In‑home assessment and NEC Article 220 load calculation
  • Permit filing and City of Austin inspection coordination
  • Safe removal of old panel and installation of a new, code‑compliant 200A main breaker panel
  • Service‑entrance cable and meter can adjustments where required by the utility
  • Grounding and bonding corrections per code
  • Labeling, testing, and homeowner walkthrough

What can reduce your cost:

  • Load management device instead of full service upgrade when your existing service has headroom
  • Minor panel swap without service‑entrance changes
  • Bundling work, such as EV charger plus panel, during the same visit

Local insight: In Austin Energy territory, many upgrades can be scheduled and completed in a single day once permits are approved. Our team routinely moves inspection appointments quickly, which keeps your project and remodel on schedule.

Cost Breakdown: Where The Money Goes

Understanding the parts of the estimate helps you compare quotes apples to apples.

  1. Materials
    • 200A main breaker panel with sufficient spaces for future circuits
    • Main breaker, AFCI/GFCI breakers where required, lugs, fittings, conduit
    • Service‑entrance cable, meter can adjustments, grounding electrodes and conductors
  2. Labor
    • Panel demo, new panel mount, terminations, labeling, testing, and homeowner walkthrough
  3. Permits and inspections
    • City and utility coordination fees vary by jurisdiction
  4. Corrective work
    • Grounding and bonding updates, relocation to meet working‑clearance rules, or rerouting conductors
  5. Add‑ons
    • Whole‑home surge protection, new dedicated circuits, EV charger, or subpanel

Tip: Ask for a line‑item quote. Transparent pricing makes it easy to remove or defer optional items without compromising safety.

Signs You’re Outgrowing 100 Amp Service

  • Frequent breaker trips during HVAC or oven use
  • Warm or buzzing panel, corrosion, or scorch marks
  • Limited breaker spaces, double‑tapped breakers, or a fuse box
  • Voltage drop symptoms like flickering lights under load
  • Planning EV charging, heat pump, or a major addition within 12 to 24 months

Review callout: “Really happy with the quick turn around and they easily beat competitor quotes to get a 14-50 plug installed for our new EV Charger... made a recommendation to upgrade some older breakers in the future. Highly highly recommend A‑Team!”

200A Upgrade vs Load Management: Which Is Smarter For You?

Sometimes the fastest path to an EV charger or new HVAC is a smart load management solution rather than a full service upgrade.

  • Full 200A upgrade is best when:

    1. Your load calculation already exceeds or is near 100A capacity.
    2. You’re adding multiple large loads within 1 to 2 years.
    3. Your panel is outdated or unsafe.
  • Load management can be better when:

    1. You have occasional peak usage rather than constant heavy loads.
    2. You want to avoid utility service changes or long lead times.
    3. Budget or schedule is tight before a move‑in or remodel milestone.

A Team always performs a load calculation first, then shows side‑by‑side costs so you can choose confidently.

Timeline: How Long Does A Panel Upgrade Take?

Most 200A upgrades take one working day on site once the permit is approved.

Typical workflow in Austin:

  1. In‑home assessment and load calculation
  2. Permit filing and scheduling with the City of Austin and Austin Energy as needed
  3. Power safely shut down in the morning
  4. Panel removal, service‑entrance and grounding updates, and new 200A panel installation
  5. Inspection and utility re‑energize, followed by testing and homeowner walkthrough

Expected power outage window: 4 to 8 hours for a standard upgrade. Complex projects can take longer.

Code, Safety, and Compliance You Can Trust

  • NEC Article 220 governs residential load calculations used for panel sizing.
  • AFCI and GFCI protection are required in specific locations per current code.
  • Grounding and bonding must meet current standards for safety and equipment protection.
  • Texas electricians are licensed by the Texas Department of Licensing and Regulation (TDLR).

Our licensed, insured team completes fully code‑compliant installations, handles permits, and coordinates inspection so you do not have to.

Review callout: “They checked all of the electricity in my panel to make sure every thing was up to code and working correctly. I would recommend A Team if you need any electric service.”

What Affects Your Final Price The Most

  1. Service‑entrance work
    • Replacing a weatherhead, mast, meter can adjustments, or moving the service to meet clearance rules.
  2. Panel location and access
    • Tight closets, finished walls, or long conductor runs increase labor.
  3. Grounding and bonding corrections
    • Many older homes lack proper electrodes and bonding.
  4. Breaker count and type
    • AFCI and dual‑function breakers cost more than standard breakers.
  5. Utility and jurisdiction requirements
    • Some homes require utility coordination for meter or service changes.
  6. Add‑ons
    • EV charger circuits, subpanels, and whole‑home surge protectors add cost but may be cheaper to bundle now.

Real‑World Austin Examples

  • Hyde Park or Crestview homes with original 100A panels often need grounding upgrades and AFCI updates when modernizing. Bundling a 200A panel upgrade with an EV charger circuit can reduce overall cost compared to two separate visits.
  • Newer homes in Leander or Pflugerville may have 150A service that is close to capacity after adding a heat pump plus EV. Load management may bridge the gap without a utility service change.

How We Build A No‑Surprise Quote

  1. Free in‑home or virtual consultation
  2. NEC load calculation and future‑proofing discussion
  3. Transparent line‑item proposal with options
  4. Permit coordination plan and timeline
  5. Single‑day installation plan, including outage window and inspection target
  6. Post‑install testing, labeling, and homeowner training

You get pricing that reflects today’s needs and tomorrow’s plans, with clear choices to control budget.

Add‑Ons To Consider During A 200A Upgrade

  • Whole‑home surge protection to protect electronics and heat pump compressors
  • Dedicated circuits for kitchen appliances, workshop tools, or a home office
  • Subpanel for a garage or accessory dwelling unit
  • Smart load management for EVs to avoid utility upgrades
  • Replacement of aging breakers that are obsolete or prone to nuisance trips

Can You DIY A Panel Upgrade?

No. Panel and service upgrades involve live utility equipment, permits, and inspections. In Texas, this work must be performed by licensed electricians. DIY attempts create safety and insurance risks and often trigger failed inspections and delays.

Financing, Rebates, and Ways To Save

  • Bundle work: Combine EV charger, surge protection, or dedicated circuits with your panel upgrade to save on labor.
  • Choose load management when smart and safe: It can avoid a costly utility service change while delivering the charging performance you need.
  • Seasonal promos: Ask about current coupons, including free in‑home consultations.

Review callout: “After they were able to move my appointment with the city up by over a month allowing me to move forward with my home projects well ahead of schedule... replacing my main panel and running a new line to my garage.”

How To Compare Quotes The Right Way

  • Confirm NEC load calculation is included
  • Verify permit and inspection handling are in scope
  • Check panel brand, number of spaces, and breaker types
  • Ask about grounding corrections and surge protection
  • Ensure warranty terms and workmanship guarantees are in writing
  • Require start‑to‑finish timeline, not just an install date

Our One‑Day Upgrade Process

  • In‑home assessment to evaluate current capacity and future needs
  • Load calculation to size service correctly
  • Permit coordination with the City of Austin
  • Safe panel removal and installation of a code‑compliant 200A breaker panel
  • Inspection approval and system testing, plus a homeowner walkthrough

This structured approach keeps your project on time, within budget, and fully compliant.

Service Areas We Cover

We serve Austin, Round Rock, Georgetown, Cedar Park, Leander, Pflugerville, Hutto, Manor, Taylor, and Elgin. If you do not see your city listed, call us. We frequently travel for panel and service upgrades.

Hard Facts That Matter

  • NEC Article 220 defines the standard method for residential load calculations used to size main service and feeder conductors.
  • Texas electricians must be licensed by the Texas Department of Licensing and Regulation. Always verify licensing and insurance before authorizing panel work.

Ready To Price Your 200A Upgrade?

Call A Team Home Services at (737) 306-0078 or request service at https://callateamtoday.com/. Ask for a free in‑home consultation and a line‑item quote that includes permits, inspection, and future‑proofing options.

Special Offers For Austin Homeowners

  • Special Offer: Free in‑home consultation for panel upgrades. Call (737) 306-0078 or request service online before 2026‑08‑05.
  • Complimentary panel check during your visit. Ask your electrician to review breaker health and code items. Offer available through 2026‑08‑05.
  • Save big with smart load management when appropriate. In some cases you can skip a costly utility service upgrade. Call (737) 306-0078 by 2026‑07‑01 to learn more.

What Homeowners Are Saying

"Ricky and Marquis were recommended to me for major electrical upgrades... moved my appointment with the city up by over a month... replacing my main panel and running a new line to my garage." –Austin Homeowner

"Jake arrived on time, explained the process to upgrade the electrical panel, answered all my questions, and gave me options." –Austin Homeowner

"They beat competitor quotes for our EV Charger, started immediately, checked the charger was getting all the power it needed, and recommended upgrading older breakers." –EV Charger Customer, Austin

"They scheduled my service the same day and checked everything in my panel to make sure it was up to code and working correctly." –Austin Homeowner

Frequently Asked Questions

How much does it cost to upgrade from 100A to 200A in Austin?

Most projects range from $3,000 to $6,500. Complex work with service‑entrance changes or extensive grounding can run higher. A load calculation and site visit refine pricing.

Do I always need 200A to add an EV charger?

Not always. We perform a load calculation first. A load management device may safely support Level 2 charging without a full service upgrade in some homes.

How long will my power be off during the upgrade?

Expect 4 to 8 hours for a standard one‑day upgrade. Complex relocations or utility coordination can extend the outage window.

Is a permit required for panel upgrades in Austin?

Yes. Panel and service upgrades require permits and inspections. We handle permit coordination with the City of Austin and schedule the inspection.

What else should I upgrade while I’m at it?

Consider whole‑home surge protection, AFCI/GFCI where required, new dedicated appliance circuits, and replacing aging or obsolete breakers.

Bottom Line

A 100A to 200A electrical panel upgrade increases safety and gives you room for EVs, efficient HVAC, and future projects. In Austin, expect $3,000 to $6,500 for most homes, with timing often completed in a single day. Ready for a precise quote and options that fit your budget?

Call, Schedule, Or Chat

Call A Team Home Services at (737) 306-0078 or visit https://callateamtoday.com/ to book your free in‑home consultation. Ask about load management to save money and mention today’s limited‑time consultation offer for panel upgrades.

Call now: (737) 306-0078 • Schedule online: https://callateamtoday.com/ • Free in‑home consultation available until 2026‑08‑05 for qualifying homeowners.

About A Team Home Services

A Team Home Services is Austin’s local, licensed, and insured electrical contractor. Our electricians handle permits and inspections, deliver fully code‑compliant work, and back it with strong warranties. We’re Google Guaranteed, BBB A+ accredited, and recipients of Angie’s List Super Service and HomeAdvisor Elite Service awards. From EV chargers and panel upgrades to whole‑home surge protection, we provide transparent pricing, same‑day responsiveness, and options that fit your home and budget.

Sources 12

Need Help With Your Home?

Turn helpful advice into action with professional service from our experienced technicians.

Call now