← All blogs

Georgetown, TX Whole-Home Rewiring Cost Guide 2025

If you are researching the cost to rewire a house, you are likely weighing safety, code updates, and future upgrades like EV charging. This guide explains 2025 rewiring costs in plain English, with Austin-specific insights. You will see real line items, timelines, and ways to save without cutting corners. A Team Home Services delivers licensed, code-compliant rewires with upfront estimates and the option to phase work to minimize disruption.

What whole-home rewiring includes in 2025

Rewiring replaces unsafe or outdated wiring and brings your home up to current safety standards. A typical scope includes:

  • Running new grounded circuits throughout the home
  • Upgrading or replacing the main electrical panel as needed
  • Installing GFCI and AFCI protection for shock and arc fault safety
  • Adding or relocating outlets to suit modern room layouts and usage
  • Whole-home surge protection to safeguard electronics and appliances
  • Dedicated circuits for high-demand appliances and HVAC
  • Optional integrations for EV chargers, SPAN smart panels, and home batteries
  • Full electrical inspection, permitting, and coordination with the utility and city

For older homes, many Austin homeowners choose a phased plan during remodels to reduce disruption and align with other trades.

Average cost to rewire a house in 2025

Every home is different, but these ballpark ranges help you plan. Prices reflect typical Austin-area conditions and licensed, permitted work.

  • Per square foot: 4.50 to 9.00 dollars depending on access, finishes, and code updates
  • Per opening, such as outlets and switches: 120 to 250 dollars including device and labor
  • Typical homes by size:
    1. 1,000 sq ft: 4,500 to 9,500 dollars
    2. 1,500 sq ft: 7,000 to 14,000 dollars
    3. 2,000 sq ft: 9,000 to 18,000 dollars
    4. 2,500 sq ft and up or complex historic homes: 13,000 to 30,000 dollars plus

Homes with plaster walls, knob and tube, aluminum branch wiring, or limited attic and crawlspace access trend higher due to labor and safety measures.

Key cost drivers

  • Age and wiring type: Knob and tube or aluminum branch circuits require remediation and more time
  • Access and finishes: Finished basements, plaster, stone, or limited attics increase patching and labor
  • Panel capacity: Many rewires add a 200 amp panel to support HVAC, EV charging, and future loads
  • GFCI and AFCI protection: Devices and breakers add cost but are required in many areas
  • Permit and inspection fees: Vary by jurisdiction and project size
  • Circuit count: More dedicated circuits for kitchens, laundry, and equipment increase materials and labor
  • Upgrades and integrations: EV chargers, smart panels, and surge protection add line items but prevent future rework

Line-item pricing breakdown

These are common components you will see on a professional estimate.

  • Main panel upgrade or replacement: 1,800 to 4,500 dollars for most homes, higher for service relocations
  • Service upgrade to 200 amp with meter base and mast adjustments: 2,500 to 6,500 dollars depending on utility coordination
  • New circuits, wire, boxes, and rough-in labor: 300 to 800 dollars per circuit based on run length and access
  • GFCI or AFCI breakers: 45 to 120 dollars per breaker plus installation
  • Combination GFCI receptacles where breakers are not ideal: 35 to 75 dollars each plus labor
  • Standard outlets and switches: 85 to 200 dollars each including trim-out
  • Whole-home surge protector: 350 to 1,200 dollars installed depending on model and warranty
  • Smoke and CO detectors with interconnect: 75 to 150 dollars per device installed
  • Drywall patching and paint blend: 2 to 6 dollars per square foot if not handled by your remodeler
  • Permits and inspections: 150 to 600 dollars in most Austin-area jurisdictions
  • Specialty work like trenching for detached structures: 20 to 45 dollars per linear foot based on soil and depth

Costs vary with brand choices, warranty tiers, and whether you bundle related upgrades.

2025 codes and safety facts that impact price

  • Hard fact 1: GFCI protection is required in areas with water exposure such as kitchens, bathrooms, garages, outdoors, and laundry locations under NEC 210.8. This adds GFCI devices or breakers to your material list.
  • Hard fact 2: AFCI protection is required on most 120 volt 15 and 20 amp branch circuits in habitable rooms under NEC 210.12. Many projects meet this with AFCI or dual function breakers.
  • Hard fact 3: In Texas, electrical work must be performed by licensed electricians regulated by the Texas Department of Licensing and Regulation. This protects homeowners and ensures code compliance.
  • Hard fact 4: Austin requires electrical permits and inspections for rewiring and panel replacements. Passing inspection documents your upgrade for insurance and resale.

If your home has 1960s to early 1970s aluminum branch wiring, expect remediation steps such as using approved connectors or rewiring affected circuits to reduce fire risk.

Sample budgets for Austin-area homes

These examples show how choices affect totals. Actual pricing depends on in-home inspection and design.

  1. 1,300 sq ft bungalow, accessible attic, minimal drywall repair

    • Replace panel with 150 to 200 amp, add dual function breakers
    • Rewire 12 circuits, new grounded receptacles and switches
    • GFCI in kitchen and baths, whole-home surge protector
    • Permit, inspection, trim-out
    • Estimated range: 8,500 to 12,500 dollars
  2. 1,900 sq ft 1970s two-story with limited access

    • Full rewire and AFCI or dual function protection
    • Panel upgrade to 200 amp to support heat pump and EV charging
    • Dedicated laundry and microwave circuits, interconnected smoke and CO
    • Moderate drywall repair and paint blend
    • Estimated range: 13,500 to 20,000 dollars
  3. 2,400 sq ft older home with plaster and detached garage

    • Full rewire, panel and service upgrade
    • Trenching to detached structure, new subpanel, GFCI for outdoor circuits
    • SPAN smart panel chosen for load management and future battery integration
    • Extensive patch and paint by finish contractor
    • Estimated range: 22,000 to 34,000 dollars

Timeline and what to expect

  • Consultation and estimate: Free for remodeling projects or a nominal 29 dollar consultation fee for electrical services. Virtual text-based consultations are available for scoping.
  • Design and permits: 2 to 10 business days depending on scope and city review
  • Rough-in rewiring: 2 to 5 days for most homes, phased if occupied
  • Inspections: 1 to 2 visits scheduled with the city and utility as required
  • Trim-out and testing: 1 to 2 days installing devices, labeling the panel, and performing safety checks

We coordinate power-off windows and restore critical circuits daily when possible. Phased approaches keep kitchens and essential spaces usable.

How to save without cutting corners

  • Combine with remodels: Open walls during kitchen or bath work to reduce patching and labor
  • Prioritize circuits: Start with life-safety and high-load areas, then phase bedrooms and living spaces
  • Choose value brands: Code-compliant devices with solid warranties control costs
  • Plan future loads now: Add spare capacity for an EV charger or heat pump so you avoid a second panel upgrade later
  • Limit finish repairs: Strategic fishing methods and attic routes minimize drywall work
  • Use financing: Spread payments with GreenSky to align with your budget
  • Look for incentives: The federal Energy Efficient Home Improvement Credit, Section 25C, may provide a credit up to 600 dollars for an electrical panel upgrade when it is required to support qualified equipment. Always confirm eligibility with your tax advisor.

Financing, warranties, and insurance

  • Financing: Flexible options through GreenSky available for larger electrical remodels
  • Warranty: Professional workmanship warranty and manufacturer warranties on panels, breakers, and surge protectors
  • Insurance and documentation: Permits, inspection records, and panel labels help with insurance and resale. Rewiring can also lower the risk profile that some insurers price against for older homes.

Why Austin homeowners choose A Team Home Services

  • Licensed, insured, and code-compliant electricians who follow the National Electrical Code
  • Transparent process with upfront estimates and clear scope documents
  • Ability to phase rewires around your remodel to reduce disruption
  • Integration expertise for EV charging, SPAN smart panels, and Generac generators
  • Customer convenience with free estimates for remodeling projects, a simple 29 dollar consultation fee for electrical services, and text-based virtual consultations
  • Fast, responsive service, 24-7 live phone support, and a customer satisfaction rating exceeding 95 percent

We serve Austin, Round Rock, Georgetown, Cedar Park, Leander, Pflugerville, Hutto, Manor, Taylor, and Elgin with local crews who know city and utility requirements.

What Homeowners Are Saying

"Jason and his co worker Seth were great! I would and do recommend the hiring of this company for your next project! I am sure that this has been a great success because I was waiting on this job to be completed for a very long time with all the other companies I called and ridiculous quotes I received. The A team had this done within 2 weeks of receiving their quote. Within 5 days of actually starting the job and that would have taken only 2 days but we had to wait on bluebonnet in between the start and finish of job. They were hired to rewire my main house with the power pole outside and then completed the new house for the same job. It’s a success both homes have power. Very easy to deal with. Very upfront and great hard workers at the A Team. I recommend this company 5 out of 5 stars!"
–Jason Customer, Rewiring

"Jake came so promptly(and even sent a photo of himself prior to arrival-nice touch) for some electrical work needing done. Super nice guy, patiently listened to my story, then performed whole house type inspection. Gave me an estimate, went to work. I'm so glad I called ATeam"
–Jake Customer, Whole-House Inspection

"Started a project and just needed an expert for a small job out in the country! New electrical outlet and wanted whole home surge protector, Daniel was knowledgeable and helped the same day. Will use them again!"
–Daniel Customer, Surge Protection

Frequently Asked Questions

How much does it cost to rewire a 1,500 sq ft house in 2025?

Expect 7,000 to 14,000 dollars in the Austin area for licensed, permitted work. Access, panel upgrades, and drywall repairs move the number up or down.

How long does a whole-home rewire take?

Most projects take 3 to 7 working days, plus permit lead time. Phased plans can keep parts of the home live and spread work over several weeks.

Do I need a panel upgrade to rewire my home?

Not always. Many homes benefit from a 200 amp panel if you plan for EV charging, heat pumps, or major appliances. We confirm with a load calculation.

Will you patch drywall after rewiring?

We minimize wall cuts, then patch as scoped. Some homeowners prefer their remodeler to handle finish texture and paint for a perfect match.

Can I finance a rewiring project?

Yes. We offer financing through GreenSky to spread payments over time. We also provide free remodeling estimates and upfront pricing.

Rewiring is a smart investment in safety, reliability, and future flexibility. With clear scope, permits, and tested components, you avoid nuisance trips and hidden hazards. If you are comparing the cost to rewire a house in Austin for 2025, we are ready to help with a precise, transparent estimate and a plan that fits your schedule.

Ready for a code-compliant rewire with clear pricing? Call A Team Home Services at (737) 306-0078 or schedule at https://callateamtoday.com/. Ask about free remodeling estimates, our simple 29 dollar consultation for electrical services, and GreenSky financing.

A Team Home Services is Austin’s trusted, licensed electrical contractor delivering safe, code-compliant work with transparent pricing. We hold state and local licenses, maintain BBB A+ accreditation, and are Google Guaranteed. Our team installs SPAN smart panels, Generac generators, EV chargers, and whole-home surge protection. Homeowners choose us for fast response, 24-7 live phone support, free remodeling estimates, flexible financing through GreenSky, and a customer satisfaction rating exceeding 95 percent. We back our work and respect your home.

Sources 12

Need Help With Your Home?

Turn helpful advice into action with professional service from our experienced technicians.

Call now