← All blogs

Georgetown, TX Whole-Home Rewiring Costs & Benefits

Upgrading old wiring is one of the smartest safety and value moves you can make. If you are researching electrical wiring upgrade cost, this guide breaks down real‑world price ranges, what drives them, and how to plan a clean, code‑compliant rewire in the Austin area. We will show you how to phase work with remodels, when panel upgrades make sense, and the benefits you will see on day one.

Why Upgrade Your Home’s Wiring Now

Old or undersized wiring can cause nuisance breaker trips, flickering lights, and overheating at connections. More important, it can increase fire and shock risk. A modern wiring upgrade brings your home up to today’s National Electrical Code and supports the way you live now with EV charging, home office gear, smart panels, and efficient HVAC.

Key safety facts to ground the decision:

  1. The NEC requires GFCI protection in kitchens, bathrooms, garages, laundry areas, and outdoor locations to reduce shock risk.
  2. The NEC requires AFCI protection in most habitable rooms to reduce arc‑fault fire risk.
  3. Many Austin‑area homes built before the 1980s may still have limited grounding or cloth‑insulated cable. Some late‑1960s to early‑1970s homes used aluminum branch‑circuit wiring, which the U.S. Consumer Product Safety Commission warns can have higher failure rates if not corrected by approved methods.

Local insight: In Central Austin neighborhoods like Hyde Park and Brentwood, remodels often uncover mixed wiring types and shallow boxes. A structured plan with permits prevents costly rework when the inspector arrives.

What Is Included in a Wiring Upgrade

A whole‑home upgrade is more than pulling new cable. It is a system approach built to code and to your lifestyle.

Includes:

  • New grounded circuits throughout the home
  • GFCI and AFCI protection where required
  • Panel work as needed such as breaker upgrades, fuse‑to‑breaker conversions, or full panel replacement
  • Outlet additions or relocations to match modern furniture layouts
  • Dedicated circuits for appliances like induction ranges, dryers, and mini‑splits
  • Whole‑home surge protection
  • Load calculations to right‑size the service and panel
  • Labeling and documentation for future service

Optional integrations:

  • Capacity for EV chargers and future Level 2 upgrades
  • Smart panels such as SPAN for monitoring and load automation
  • Generator interlocks or transfer switches for standby power
  • Prewire for home networking, security, or shades during remodels

Electrical Wiring Upgrade Cost Breakdown

Every home is different, but costs fall into predictable buckets. Think of it as materials, labor, access, and permits.

  1. Materials
    • Copper cable, boxes, receptacles, AFCI and GFCI breakers, surge device, panel and meter gear if needed.
    • Smart panel or generator gear if you add them.
  2. Labor
    • Demo and fishing new cable, device terminations, panel work, labeling, and cleanup.
    • Coordination with drywall or paint if walls are opened.
  3. Access and complexity
    • Attic, crawlspace, and wall access have major impact. Vaulted ceilings, plaster walls, or masonry exteriors take more time.
    • Occupied homes require protective measures, daily cleanup, and phased power restoration.
  4. Permits and inspections
    • Austin‑area jurisdictions follow the National Electrical Code with local amendments. Permits and inspections are required for rewiring.

Typical ranges in our market:

  • Partial or phased rewiring of a few circuits or rooms: lower four figures to mid four figures depending on scope.
  • Whole‑home rewiring in small homes or condos with good access: mid to high four figures.
  • Whole‑home rewiring in larger or older homes with limited access or panel upgrades: high four figures to low five figures.
  • Add‑ons like EV charger circuits, SPAN smart panel, or generator readiness increase cost but add future value.

What drives price up or down:

  • Panel condition and service size
  • Number of required dedicated circuits
  • Wall surface type and finish expectations
  • Attic height and insulation density
  • Presence of aluminum branch wiring or knob‑and‑tube
  • Need for trenching to detached structures or a new grounding electrode system

How Electricians Estimate Your Project

A trustworthy estimate is built on data and inspection, not guesswork. Here is our approach that keeps surprises off your invoice.

  1. Free in‑home inspection for remodel scope or a low‑cost consultation for troubleshooting services when a remodel is not yet defined.
  2. Load calculation to verify your panel and service can support present and future needs.
  3. Circuit map that documents what will be replaced, abandoned, or added.
  4. Permit path and inspection plan for your city.
  5. Written, up‑front estimate that outlines inclusions, allowances for drywall repair, and any optional upgrades.

Pro tip: During the walk‑through, flag any planned appliances, future EVs, or a potential mini‑split. Pulling one more circuit while the walls are open is far cheaper than returning later.

Timeline: What to Expect Day by Day

Your calendar matters. Here is a realistic sequence for a typical occupied home.

Day 1

  • Safety prep, dust protection, and panel evaluation
  • Circuit mapping and first pulls for bedrooms or low‑use spaces

Day 2 to 3

  • Main circuit replacement continues
  • GFCI and AFCI devices installed
  • Panel work begins, labels updated

Day 4 to 5

  • Kitchen, laundry, and bathroom circuits
  • Surge protector and any dedicated appliance circuits

Day 6+

  • Final device trims, testing, and labeling
  • City inspection, punch list, and homeowner orientation

Occupied homes may need a few short planned outages. Many projects can be phased so your kitchen and critical rooms stay live overnight.

Phased or Partial Rewiring to Control Disruption

If you are remodeling in stages or living through construction, phasing is your friend. We often align rewiring with bath or kitchen work, additions, or panel upgrades. Benefits include:

  • Lower disruption and less drywall repair
  • Easier scheduling around holidays or remote work
  • Spreading investment across milestones
  • Early wins such as a new grounded home office or EV charging before the full project

Ask for a written phase plan so you know what will be finished, what remains, and how it affects permits and inspections.

Panel Upgrades, Breakers, and Protection Devices

Many older homes have 100‑amp service and limited breaker spaces. Today’s homes often need 150 to 200 amps. A panel upgrade can unlock space for dedicated circuits, EVs, and HVAC.

Consider a panel or service upgrade when you see:

  • Frequent tripping on multi‑appliance use
  • Warm or buzzing panel
  • Rust, moisture, or damage
  • Fuse boxes that are past service life
  • Double‑tapped breakers or missing labeling

Protection devices you should expect:

  • AFCI breakers on most habitable room circuits to reduce arc‑fault risk
  • GFCI protection for wet or outdoor locations to reduce shock risk
  • Whole‑home surge protection to protect electronics and smart appliances

Benefits You Will Notice Immediately

A wiring upgrade is not just about code. It delivers tangible quality‑of‑life improvements:

  • Quieter panel, fewer trips, and stable voltage under load
  • Safer outlets with proper grounding
  • More outlets where you actually plug in
  • Ready for EV charging, induction cooking, or a heat pump
  • Insurance and resale confidence with documented permits and inspections
  • Visibility and control when paired with a smart panel

Smart Panels, EV Charging, and Future‑Proofing

If you are planning EV charging or peak‑shaving, consider a smart panel like SPAN. It gives you circuit‑level monitoring and load management without upsizing service in some cases. Rewiring is the perfect time to lay the groundwork.

Options to discuss:

  • Level 2 EV charging at 40 to 60 amps
  • SPAN smart panel or similar for monitoring and load automation
  • Generator interlock or transfer switch for outages
  • Battery‑ready wiring that reserves space and conduit paths

Permits, Codes, and Inspections in the Austin Area

Texas follows the National Electrical Code and local jurisdictions adopt current editions with amendments. In the Austin metro, permitted work and inspections are standard for rewiring. Hiring a licensed and insured contractor protects you and keeps the project moving through plan review and inspection with fewer delays.

Your contractor should:

  • Pull the proper permits
  • Meet all inspection checkpoints
  • Provide labeled panel schedules and documentation at closeout
  • Offer proof of license and insurance on request

How to Read and Compare Rewiring Estimates

To compare apples to apples, check these details:

  • Scope clarity: number of circuits, rooms, and devices included
  • Panel work: replace, upgrade, or reuse
  • Protection devices: AFCI, GFCI, and surge
  • Access assumptions: attic, crawlspace, drywall repair
  • Timeline and phasing plan
  • Cleanup standards and daily protection
  • Permits, inspection fees, and warranty terms
  • Options and allowances for EVs, smart panels, or generators

A transparent proposal will spell out inclusions and options, not bury them in fine print.

Maintenance After the Upgrade

Electrical systems last longer and stay safer with periodic checks.

  • Schedule a professional electrical inspection every 3 to 5 years, or more often for homes older than about 40 years.
  • Test GFCI and AFCI devices twice a year.
  • If you add a generator, EV charger, or smart panel, ask about annual maintenance, remote monitoring, and priority service plans.
  • Keep panel areas clear of storage and moisture.

Financing, Consultations, and Project Planning

We provide free estimates for remodeling projects and offer a nominal consultation for general electrical services when a full remodel is not defined. Many homeowners use financing for larger electrical projects. If you are stacking upgrades like panel, EV charging, and rewiring, a single plan and permit set can lower total cost and downtime.

When a Full Rewire Is the Right Call

Not every home needs a total gut. Signs that a full rewire is likely the best path:

  • Widespread ungrounded outlets
  • Aluminum branch circuits or cloth‑insulated cable discovered in multiple rooms
  • Frequent overheating or burnt outlet smell
  • Multiple failed DIY add‑ons and open splices
  • Panel at capacity with no room for new circuits

In these cases, a clean start with new home runs, updated protection, and a modern panel provides the safest and most cost‑effective long‑term result.

How A Team Home Services Delivers a Cleaner Rewire

  • Local, licensed electricians who work to the latest code
  • Up‑front, written estimates and a clear phase plan
  • Coordination with your GC, designer, or remodel schedule
  • Smart panel, generator, and EV integrations handled in‑house
  • Strong warranties and award‑winning service
  • Respect for your home with daily cleanup and communication

What Homeowners Are Saying

"They were hired to rewire my main house with the power pole outside and then completed the new house for the same job. It’s a success both homes have power. ... I recommend this company 5 out of 5 stars!"
–Joshua S., Whole‑home Rewire

"Can’t thank them enough for all the work they did replacing my main panel and running a new line to my garage. Cheers yall, I’ll be coming back to you guys every time"
–Preston F., Panel Upgrade

"... then performed whole house type inspection. Gave me an estimate, went to work. I'm so glad I called ATeam"
–Brenda F., Electrical Inspection

"He also did a free once over of my electrical system to let me know what might need updating going forwards. A great job at a great price from a great company. Couldn't be happier."
–Lyle M., Electrical Service

Frequently Asked Questions

How much does a full home rewiring cost in the Austin area?

Pricing varies by size, access, and panel needs. Smaller homes with good access land in the mid to high four figures. Larger or complex homes can reach the low five figures.

How long does a whole‑home wiring upgrade take?

Most projects take 4 to 7 working days, plus inspection time. Occupied homes may be phased so critical rooms stay powered overnight.

Do I need a permit for rewiring?

Yes. Austin‑area jurisdictions require permits and inspections for rewiring. Licensed electricians handle applications and schedule inspections.

Will walls need to be opened?

Often, some walls or ceilings are opened to fish new cable. A good plan reduces openings and includes allowances for patch and paint.

What if my panel is old but “works fine”?

If the panel lacks capacity, shows heat damage, or uses outdated equipment, upgrading during rewiring is safer and often saves return trips later.

Conclusion

A wiring upgrade raises safety, reliability, and future value while aligning your home with today’s code. If you are pricing an electrical wiring upgrade cost in Greater Austin, start with a clear scope, phased plan, and a licensed team that can integrate EV, smart panels, and surge protection. We are ready to build a plan that fits your budget and timeline.

Get Your Up‑Front Estimate Today

Call A Team Home Services at (737) 306-0078 or visit https://callateamtoday.com/ to schedule your free in‑home estimate for remodeling projects or a quick consultation for electrical services. Serving Austin, Round Rock, Georgetown, Cedar Park, Leander, Pflugerville, Hutto, Manor, Taylor, and Elgin. Upgrade safely and confidently with a local, licensed team.

About A Team Home Services

A Team Home Services is a licensed, insured electrical contractor serving Greater Austin. We deliver code‑compliant rewires, SPAN smart panels, Generac generators, and EV charging. Homeowners choose us for transparent estimates, flexible phasing, strong warranties, and award‑winning service including BBB A+ and Google Guaranteed. We combine local permitting know‑how with clean workmanship and clear communication to finish on time and on budget.

Sources 12

Need Help With Your Home?

Turn helpful advice into action with professional service from our experienced technicians.

Call now